2007 Hawk 2 Horse Bumper Pull Side Ramp

Description

A two-horse straight load with both rear and side loading ramps — the side ramp 54 in wide — in aluminum over a galvanized steel frame with a fiberglass top.

A side ramp on a two-horse bumper pull is genuinely hard to find, and it changes how the trailer handles a difficult loader. A horse that will not back down a rear ramp can walk in one side and out the other, and 54 inches is wide enough to lead one through comfortably. The doors over both ramps latch back during travel, which the seller notes gives excellent ventilation.

The rest, as recorded: two-way roof vents over each stall, sliding windows on the sides and in the rear doors, a removable head divider, nicely padded walls, divider, chest bars and butt bars, rubber-lined walls, a bulkhead window and sliding windows in the nose, and a dressing room with saddle racks, bridle hooks, blanket bar and brush box. Measured at 7 ft 7 in tall, 6 ft 6 in wide, 16 ft box, 2,900 lb empty against 7,000 lb gross on two 3,500 lb axles. The seller describes it as in good used condition, recently serviced, with tires less than a year old.