40ft Tilt Bed Trailer v2

Description

A 40 ft hydraulic tilt-bed trailer on two 10,000 lb dual-wheel axles with a 12 in I-beam frame and eight side winches, built for loading and hauling shipping containers and long equipment.

A tilt bed lets you slide a container or machine on without a crane or forklift. A 12 V hydraulic pump drives twin lift cylinders to tip the bed, which is tapered at the back to meet the ground cleanly, and a winch plate up front gives a pulling point.

The frame and neck are 12 in × 19 lb I-beam, with 3 in channel crossmembers on 16 in centres under a treated pine floor. Six-inch steel runners line the outside boards and 2 × 2 × 1/4 in angle guides keep a container square on the deck. Eight 4 in winches along the sides handle straps.

Two 10,000 lb axles run dual wheels with electric brakes, on 235/80R16 E-rated 10-ply tires and silver mod wheels. A 30,000 lb adjustable coupler, two 12,000 lb jacks, a breakaway kit with built-in charger and battery gauge, sealed wiring, LED lights, DOT tape and an enamel finish.